Automatic transmission adaptation procedure for Subaru Impreza 2008
Tools and materials:
* Subaru Select Monitor scanner or equivalent
* Reliable power supply
Safety:
* Make sure the vehicle is in park and the parking brake is set.
* Do not start the engine during the adaptation procedure.
Procedure:
1. Connect the scanner to the vehicle’s diagnostic port.
2. Turn on the ignition, but do not start the engine.
3. Select “Automatic Transmission Adaptation” in the scanner menu.
4. Follow the instructions on the scanner screen. Typically they include the following steps:
* Set the gear selector to neutral.
* Reaching a certain temperature of the transmission fluid.
* Moving the gear selector to all positions and holding it in each position for a certain time.
5. Once the procedure is completed, the scanner will display a success message.
6. Disconnect the scanner and turn off the ignition.
Notes:
* The adaptation procedure may take up to 30 minutes.
* It is important to carefully follow the instructions on the scanner screen.
*If any problems occur during the procedure, contact a qualified mechanic.
* Automatic transmission adaptation must be performed after replacing the transmission fluid or other service work related to the transmission.
* Regular automatic transmission adaptation can help optimize transmission performance and extend its service life.