Programming automatic transmission modes StarLine A93
Materials:
* Alarm StarLine A93
*Z-2 Engine Start Module
* Car keys
* Cable adapter for connecting to the CAN bus (optional)
Programming using key fob:
1. Turn on the ignition, but do not start the engine.
2. Press the “Valet” button 7 times.
3. The alarm will emit a beep to confirm entry into programming mode.
4. Press button “2” to enter the automatic transmission modes programming section.
5. Select the required mode using buttons “1” and “2” (see table below).
6. To save the settings and exit the programming mode, press the “Valet” button.
Programming using the StarLine Master application:
1. Connect the engine starter module to your phone via Bluetooth.
2. Launch the StarLine Master application.
3. Go to the “Settings” section and select “Automatic Transmission Modes”.
4. Select the required mode from the list.
5. Save the settings by clicking the “Save” button.
Automatic transmission mode table:
| Meaning | Mode |
|—|—|
| 0 | Prohibition of automatic engine start |
| 1 | Starting the engine in Parking mode |
| 2 | Starting the engine in Neutral mode |
| 3 | Starting the engine in Park or Neutral mode (automatic selection) |
Notes:
*If you do not have the Z-2 module installed, programming is not possible.
* Some vehicles require the use of a cable adapter to connect to the CAN bus.
* Available automatic transmission modes may differ depending on the vehicle model and StarLine system configuration.