Warning: This procedure requires special knowledge and skills. Unless you are a qualified mechanic, it is not recommended to attempt this task yourself.

Required tools and materials:

* Hex key (dimensions may vary depending on vehicle model)
* Flat head screwdriver
* Jumper for automatic transmission (special tool for unlocking the gearbox)
* Mounting blade
* Torque wrench
* New flywheel

Instructions:

1. Preparation

* Disconnect the negative terminal of the battery.
* Raise the vehicle on a lift or using ramps.
* Secure the vehicle with the parking brake and wheel chocks.

2. Removing the upper gearbox cover

* Locate the bolts holding the transmission top cover and remove them using a hex wrench.
* Carefully remove the top cover.

3. Unlocking the gearbox

*Locate the jumper hole on the gearbox.
* Insert the jumper into the hole and press it to unlock the gearbox.

4. Removing the flywheel

*Locate the bolts holding the flywheel to the crankshaft and remove them using a torque wrench.
* Gently pull the flywheel toward you to remove it from the crankshaft.

5. Installing a new flywheel

* Clean the mounting surface on the crankshaft of old sealant and dirt.
* Apply sealant to the new flywheel mounting surface.
* Align the flywheel with the crankshaft and carefully slide it into place.
* Tighten the flywheel mounting bolts using a torque wrench to the required torque specified in the repair manual for your specific vehicle model.

6. Gearbox assembly

* Reinstall the transmission top cover.
* Tighten the top cover mounting bolts.
* Place the transmission in Park (P) mode.

7. Check and adjustment

* Connect the negative terminal of the battery.
* Start the engine and check for any fluid leaks or strange noises.
* If necessary, adjust the gearbox according to the repair manual.

Additional tips:

* Use the original flywheel and mounting bolts recommended by the manufacturer.
* Clean all parts before assembly.
*Pay attention to the correct torque when tightening the bolts.
* It is recommended that you consult a qualified mechanic if you have any difficulties or concerns.

Leave a Reply