Preliminary information
* Do not attempt to repair an automatic transmission yourself if you do not have the appropriate skills and tools.
* This is a complex and time-consuming process that requires special knowledge and equipment.
* Do not disassemble the box under any circumstances if you are not confident in your abilities.
Bulkhead process
If you still decide to sort out the automatic transmission, follow these steps:
1. Preparation
* Gather the necessary tools and spare parts.
* Clean the work area.
*Refer to the repair manual for your specific vehicle model.
2. Removing the box
* Disconnect the battery.
* Remove the driveshaft, starter and other related components.
* Disconnect all electrical connectors.
* Place a jack under the box and remove it from the car.
3. Disassembling the box
* Disassemble the box body using special tools.
* Remove all internal components: drums, gears, shafts, etc.
4. Inspection and cleaning
* Carefully inspect all components for wear, damage or cracks.
* Clean all parts with transmission cleaner.
5. Assembly
* Assemble the box using new or refurbished components as necessary.
* Install all parts according to the repair manual.
* Check that all mechanisms are working correctly.
6. Installation
* Reinstall the box on the car.
* Connect all electrical connectors.
* Install the driveshaft, starter and other removed components.
* Fill with new transmission fluid.
7. Check
* Connect the battery.
* Start the engine and switch the transmission to all modes.
* Check if the box is working properly.
Adviсe
* Work in a clean and well-lit area.
* Use quality tools and parts.
*Follow the repair instructions exactly.
* Take your time and pay attention to details.
*If you encounter difficulties, contact a transmission repair specialist.