Automatic transmission gear selector
An automatic transmission (AT) changes gears automatically, but some models may have the option of manual gear shifting.
Automatic transmission shift functions:
*P (Park): Keeps the vehicle in place when not moving.
* R (Reverse): Places the vehicle in reverse mode.
* N (Neutral): This position is for towing or starting the engine.
* D (Drive): Normal driving mode for most conditions.
* S (Sport): Performance mode that provides faster gear shifts and more engine power.
* L (Low): Mode for driving in lower gears, such as when towing or driving on steep slopes.
* M (Manual): This mode allows the driver to manually change gears using the gear lever or steering wheel paddles.
Automatic transmission shift control:
To control automatic transmission gear shifting, follow these instructions:
1. Depress the brake pedal: This will prevent the vehicle from moving while you change gears.
2. Move the shift lever to the desired position: Move the shift lever to the specified position (eg P, D or M).
3. Release the brake pedal: The car will start moving when you release the brake pedal.
When switching to manual mode (M):
1. Control gear shifting using the gear shift lever or paddle shifters: Pull the lever up to upshift and push down to downshift. Using the steering wheel paddles, click the left paddle to downshift and the right paddle to upshift.
2. Monitor Engine Speed (RPM): Shift up when the engine speed reaches the optimal range for fuel economy and a smooth ride.
3. Do not downshift too early: This may cause engine or transmission damage.
Precautions:
* Always check the position of the gear shift lever before starting the engine.
* Do not shift to neutral (N) while driving. This may result in loss of control of the vehicle.
* Do not tow the vehicle while in N position. This may cause damage to the transmission.
* Treat your automatic transmission correctly to prolong its life and ensure smooth shifting.