Tools and materials:

* Phillips screwdriver
* Multimeter (to check electrical connections)
* Wire strippers
* Electrical tape
* Waterproof connection box

Instructions:

1. Follow safety precautions

* Disconnect power from the electrical outlet before starting work.
* Wear rubber gloves to protect against electric shock.

2. Position the washing machine

* Place the washing machine in the desired location.
* Make sure it is on a level surface and does not wobble.

3. Know the electrical requirements

* Check your washing machine’s owner’s manual or nameplate to determine its electrical requirements (voltage, current, outlet type).

4. Install an outlet (if required)

* If there is no outlet or it does not meet the requirements, you must install a new one.
* Use a grounded electrical outlet designed for household appliances.
* Place the outlet at a height of 40-60 cm from the floor, next to the washing machine.

5. Check wiring

* Using a multimeter, check the wires going to the outlet.
* Make sure the grounding wire is connected to the grounding prong of the outlet.
* Make sure the power wires (hot, neutral and ground) are color coded correctly.

6. Connect the washing machine to the outlet

* Plug the washing machine cord into an outlet.
* Make sure the plug is inserted firmly.

7. Connect the waterproof connection box (if required)

*If the connection box is not installed, please connect it to the back of the washing machine.
* Connect the wires to the corresponding terminals on the connection box.

8. Wrap connections with electrical tape

* Wrap all connections with electrical tape to protect them from moisture and short circuits.

9. Turn on the power

* Turn on the mains power.
* Run the washing machine to check if it is working properly.

Safety Tips:

* Do not connect your washing machine to an extension cord.
*Use only the cord supplied with your washing machine.
* Do not open the washing machine while it is plugged in.
*If you have any difficulties or questions, please consult a qualified electrician.

Leave a Reply