Required tools:
* Set of socket wrenches
* Hex keys
* Jack and stands
* Screwdriver
* Wrench for loosening nuts
* Container for draining transmission fluid
Procedure:
1. Preparation
* Place the vehicle on a level surface and secure it with the parking brake.
* Jack up the front of the car and place it on stands.
* Disconnect the negative terminal of the battery.
* Drain the transmission fluid from the gearbox.
2. Removal of components and assemblies
* Remove the following components and assemblies:
* Starter
* Gear shift lever
* Cardan shaft
* Exhaust pipe
*Additional transmission frame (if equipped)
3. Disconnecting electrical and hydraulic connectors
* Disconnect all electrical connectors and hydraulic hoses from the transmission.
4. Unscrewing the bolts
* Unscrew all bolts securing the gearbox to the engine and car body.
5. Gearbox compartment
*Using a pry bar or crowbar, carefully separate the transmission from the engine.
6. Removing the gearbox
* Support the transmission and carefully remove it from the vehicle.
7. Installation of a new gearbox
* Reinstall the new gearbox in the reverse order of removal.
* Screw in all mounting bolts with the appropriate tightening torque.
8. Connecting connectors
* Connect all electrical and hydraulic connectors to the transmission.
9. Installation of components and assemblies
* Install all components and assemblies that were removed:
* Starter
* Gear shift lever
* Cardan shaft
* Exhaust pipe
*Additional transmission frame (if equipped)
10. Filling transmission fluid
* Fill the transmission with transmission fluid according to manufacturer specifications.
11. Checking the fluid level
* Check the transmission fluid level and add if necessary.
12. Battery terminal connection
* Connect the negative terminal of the battery.
13. Resetting adaptations and calibration
*If required, reset adaptations and calibrate transmission using diagnostic scan tool.