Tools and materials:
* New automatic transmission light (part number: 34906-02170)
* Phillips screwdriver
* Flat head screwdriver
Instructions:
1. Make sure the ignition is turned off.
2. Find the automatic transmission control panel on the center console.
3. Insert a flathead screwdriver into the slot on the side of the control panel and gently pry it up.
4. Remove the automatic transmission control panel by pulling it towards you.
5. Disconnect the wiring harness connector from the automatic transmission light.
6. Using a Phillips screwdriver, unscrew the lamp socket housing.
7. Remove the old light bulb from the socket.
8. Insert the new light bulb into the socket.
9. Screw in the lamp socket housing.
10. Connect the wiring harness connector to the automatic transmission light.
11. Reinstall the automatic transmission control panel by snapping it into place.
12. Check the functionality of the light bulb by turning on the ignition.
Adviсe:
*Use only approved bulb.
* When replacing a light bulb, do not touch the glass cap of the new light bulb as this may shorten its life.
* Dispose of the old light bulb according to local regulations.