Where is the speed sensor located on a Chevrolet Aveo T300 with automatic transmission:
* Under the hood, on the transmission housing on the left side of the engine.
* It is connected to the wiring harness that goes to the transmission.
How to replace the speed sensor on a Chevrolet Aveo T300 with automatic transmission:
Tools:
* 10 mm wrench
* Flat head screwdriver
Steps:
1. Disconnect the negative terminal of the battery.
2. Locate the speed sensor on the side of the transmission.
3. Disconnect the electrical connector from the sensor.
4. Using a 10 mm wrench, loosen the sensor mounting bolt.
5. Unscrew the bolt by hand and remove the sensor.
6. Compare the new sensor with the old one to make sure they are identical.
7. Install the new sensor into the hole and tighten the bolt.
8. Connect the electrical connector to the sensor.
9. Connect the negative terminal of the battery.
10. Start the engine and check if the problem is resolved.
Adviсe:
* Do not overtighten the sensor mounting bolt.
* Make sure the electrical connector is firmly seated on the sensor.
*If you are unsure of your skills, consult a professional mechanic.