Automatic transmission sealing covers

* Bolts securing the gearbox to the engine: 75-110 Nm
* Oil pan mounting bolts: 16-25 Nm
* Bolts securing the rear cardan flange to the transfer case: 75-110 Nm

Automatic transmission internal components

* Torque converter mounting bolts: 75-110 Nm
* Friction disc mounting bolts: 25-35 Nm
* Planetary gear mounting bolts: 25-35 Nm
* Oil pump mounting bolts: 25-35 Nm

Automatic transmission valve body

* Valve block mounting bolts: 10-15 Nm
* Valve block solenoids mounting bolts: 5-10 Nm

Automatic transmission drives and shafts

* Input shaft mounting bolts: 75-110 Nm
* Output shaft mounting bolts: 75-110 Nm
* Intermediate shaft mounting bolts: 75-110 Nm
* Internal spline mounting bolts: 25-35 Nm

Notes:

*These values ​​are general values ​​and may vary depending on vehicle make and model.
*Always check the manufacturer’s repair manual for instructions.
*Use a torque wrench to accurately tighten bolts.
*Apply thread sealant or thread adhesive to bolts where specified.
* Tighten bolts in sequence and in stages to evenly distribute the load.

Leave a Reply