Electrical circuit of the Indesit washing machine
Main components:
* Motor: Provides rotation of the drum.
* Heating element: Heats the water for washing.
* Water level sensor: Detects the water level in the tank.
* Door Lock: Locks the door while the machine is running.
* Control board: Coordinates the operation of all components.
Connection diagram:
Note: Connection diagrams may vary depending on the Indesit washing machine model.
Power unit:
*Connects to power supply.
*Supplies electrical power to all machine components.
Control board:
* Receives signals from sensors and controls.
* Controls the operation of the motor, heating element and other components.
Motor:
*Connects to control board.
*Can be connected directly to mains power or via a capacitor.
Heating element:
*Connects to control board.
*Can be connected directly to the power supply or via a relay.
Water level sensor:
*Connects to control board.
* Detects the water level in the tank and signals this to the control board.
Door lock:
*Connects to control board.
* Locks and unlocks the door based on a signal from the control board.
Other components:
* Sump pump: Pumps water out of the tank.
* Inlet valve: Supplies water into the tank.
* Drain hose: Drains water from the machine.
Safety Tips:
* Always unplug your washing machine before servicing.
* Do not attempt to repair the electrical system yourself unless you have the proper knowledge and experience.
* Repairs to the electrical system should only be performed by a qualified technician.