Electrical connection requirements
* Outlet: Three-prong grounding outlet with 220-240 VAC.
* Plug: A plug with three pins, including a ground pin.
*Connection diagram: The socket and plug should be connected according to the wiring color scheme.
Materials
* AWG12 stranded cable (3.31mm?)
* Socket with grounding
* Grounding plug
* Electrical tape
* Electric screwdriver
Connection Instructions
1. Cable preparation
* Trim the end of the cable to a length of about 15 cm.
* Strip about 2.5cm of insulation from each of the three wires.
2. Connection to an outlet
*Connect the color-coded bare wire (usually green or yellow) to the ground terminal on the outlet (usually green).
*Connect the bare wire with the white color code to the neutral terminal on the outlet (usually white).
*Connect the black color-coded bare wire to the power terminal on the outlet (usually black).
3. Connection to plug
*Connect the green (or yellow) bare wire to the ground terminal on the plug (usually green).
*Connect the white bare wire to the neutral terminal on the plug (usually white).
*Connect the black bare wire to the power terminal on the plug (usually black).
4. Isolation and testing
* Apply electrical tape to each of the exposed wires and to all connections.
* Plug in the washing machine and turn it on to check if the connection is working properly.
Precautions
* Before starting work, turn off the power at the circuit breaker panel or distribution panel.
* Make sure the outlet and plug are properly grounded.
* Never connect your washing machine to an extension cord.
*If you do not have experience with electrical installations, consult a qualified electrician.