Steps to unlock Lada Granta automatic transmission:

1. Make sure there is no power to the transmission.

* Open the hood and disconnect the “-” terminal of the battery.

2. Find the automatic transmission diagnostic connector.

* It is usually located under the hood near the engine. The connector is usually black or gray and has 16 pins.

3. Connect the OBDII scanner to the diagnostic connector.

* Turn on the ignition, but do not start the engine.

4. Run diagnostic software on the scanner.

*If you do not have a diagnostic scanner, contact a mechanic or an official Lada dealer for help.

5. Locate the transmission section of the software.

* This may be called “Transmission” or “Automatic”.

6. Select the “Unlock automatic transmission” action.

*The software will confirm that you want to unlock the transmission.

7. Follow the onscreen instructions.

* The software will guide you through the unlocking process.

8. Disconnect the scanner and reconnect the battery.

* Start the engine and check if the gears shift correctly.

Note:

*If you are unable to unlock the transmission using the diagnostic scanner, you may need to replace the transmission electronic control unit (ECU).
* It is always recommended that you have your automatic transmission unlocked by a qualified mechanic, especially if you do not have the technical knowledge or experience.

Leave a Reply