Automatic transmission cooling hoses Hyundai Getz
Bottom hose:
*Diameter: 13mm
* Length: approximately 1550 mm
*Part number: 46960-02010
Upper hose:
*Diameter: 12mm
* Length: approximately 1450 mm
*Part number: 46955-02010
Replacing hoses:
1. Raise the car on a lift or place it on stands.
2. Disconnect the negative battery terminal.
3. Drain some of the fluid from the automatic transmission.
4. Loosen the clamps and disconnect the old hoses.
5. Install new hoses and tighten clamps.
6. Fill the automatic transmission with new fluid to the correct level.
7. Connect the negative terminal of the battery.
8. Start the engine and let it idle to circulate the fluid.
9. Check the fluid level and add if necessary.
Adviсe:
* Use only original Hyundai hoses or high quality replacements.
* Inspect hoses for wear, cracks or leaks.
* Change automatic transmission fluid regularly to extend the life of the hoses.