Material resources:
* Electrical wires (different colors and sections)
* Electrical connectors
* Relays and fuses
* Battery
* Starter
* Generator
* Lighting devices
* Electric motors
* Buttons, switches and sensors
* Pipe bender for laying wires
* Electrical tape and heat shrink tubing
* Tool kit (screwdrivers, pliers, electrical tester, etc.)
Step by step guide:
1. Preparing the wiring diagram
* Draw a diagram of the car’s electrical system showing all the components and their connections.
* Determine the dimensions and location of each component.
2. Wiring
* Route the wires according to the diagram.
* Use a pipe bender to protect wires and give them a professional look.
* Leave sufficient wire reserve for future maintenance.
3. Connection of components
* Connect components to wires using electrical connectors.
* Make sure connections are secure and secured with tape or heat shrink tubing.
4. Installation of relays and fuses
* Install relays and fuses according to the diagram.
* These devices protect the electrical system from overloads and short circuits.
5. Battery connection
* Connect the positive terminal of the battery to the positive busbar.
* Connect the negative terminal to the car body.
6. System testing
* Check the system using an electrical tester.
* Make sure all components are working properly and there is no current leakage.
7. Finish
* Secure wires and hide them to keep things neat and tidy.
* Insulate all connections with electrical tape or heat shrink tubing.
Adviсe:
* Use the correct gauge wire for each circuit.
* Protect wires from abrasion and heat damage.
* Use high quality electrical connectors and other components.
* Clearly label wires for easy identification.
* Consult a professional if you encounter any difficulties.
Precautions:
*Always disconnect the battery before starting work.
* Wear personal protective equipment (gloves, goggles, etc.)
* Never touch the battery terminals with bare hands.
*Work in a well-ventilated area.