Materials and tools:
* Dishwasher
* Electrical cable (at least 1.5 m long)
* Socket with grounding
* Power module (if required)
* Screwdriver set
* Wrenches (for tightening cable screws)
* Construction level
* Electrical tape
Step by step instructions:
1. Determine the installation location:
* Determine where the dishwasher will be installed.
* Make sure there is access to power, plumbing and drainage.
2. Connect power supply:
* Install a grounded outlet near the installation location.
* Connect a separate electrical cable to the outlet.
*Cable size selection depends on the power consumption of the dishwasher. It is recommended to use a cable with a cross-section of at least 2.5 mm?.
3. Connect the cable module (if necessary):
*Some dishwashers require the use of a cable module to connect to the electrical outlet.
*Follow the manufacturer’s instructions for installing the cable module.
4. Connect the electrical cable to the dishwasher:
* Plug the electrical cord into the appropriate socket on the back of the dishwasher.
* Tighten the cable screws with a wrench.
5. Connect the power cable to the outlet:
* Connect the electrical cable to the outlet.
* Make sure the connection is secure.
6. Level and install the dishwasher:
* Reinstall the dishwasher.
* Use a spirit level to level it horizontally.
*Tighten the leveling feet to lock the machine in place.
7. Insulate connections:
*Wrap all electrical connections with electrical tape for added safety.
8. Make sure the connections are tight:
* Check all electrical connections to ensure they are tight and have no loose spots.
Safety Tips:
* Always turn off the power before performing any electrical work.
* Never use a wire with damaged insulation.
*If you are unsure of your electrical skills, consult a qualified electrician.