Materials and tools:
* Dishwasher
* Power cord with plug
* Wire terminals
* Electrical tape
* Electrical tape
* Screwdriver
* Pipe wrench (for water supply)
* Level
Security measures:
* Before starting work, turn off the power supply to the house.
*Check that the water tap is turned off.
* Wear safety glasses.
Instructions:
1. Connection to water supply:
* Reinstall the dishwasher.
* Connect the water supply hose to the cold water tap. Use a pipe wrench to tighten connections.
* Route the drain hose to the sink or washing machine drain.
2. Electrical connection:
* Place the dishwasher near an outlet.
*Remove the back panel of the dishwasher.
* Connect the black and white wires of the power cord to the corresponding terminals on the control board.
*Connect the green or bare copper wire to the ground terminal.
* Secure the wires with terminals and secure them with electrical tape.
3. Turn on:
* Reinstall the dishwasher.
* Open the water tap.
* Turn on the dishwasher and set the desired wash cycle.
*Check that the dishwasher is working properly and is not leaking.
4. Level installation and check:
*Adjust the dishwasher feet to level it.
* Close the back panel of the dishwasher.
* Turn on the power supply in the house.
Adviсe:
* Use a power cord that is long enough to easily plug into an outlet.
* Use terminals to connect wires securely.
* Do not overtighten the terminals as this may damage the wires.
* Make sure all connections are securely tightened and insulated.
* Check your dishwasher for leaks by running a wash cycle with detergent.