Materials:
* OBD2 reader
Instructions:
1. Connect OBD2 reader:
*Locate the OBD2 diagnostic port under the instrument panel.
*Connect the OBD2 reader to the port.
2. Reading error codes (optional):
* Turn on the engine, but do not start it.
* On the OBD2 reader, select the «Read error codes» function.
* Write down any error codes if they are displayed.
3. Resetting automatic transmission adaptations:
* On the OBD2 reader, select the «Special Features» function.
* Select the Transmission Control Module (TCM).
* Find the option to reset automatic transmission adaptations.
* Start the reset procedure.
4. Completion:
*After completing the procedure, remove the OBD2 reader.
*Turn the engine off and on again.
* Shift through all positions several times to allow the system to adjust.
Note:
*Different OBD2 readers may have slightly different instructions. Check your device’s user manual.
*After resetting the automatic transmission, it may take some time for the system to adapt to your driving style.
*If you are unsure of following these instructions, it is best to consult a qualified mechanic.